催化裂化管式待生剂分配器颗粒分配特性及内部流动特性的CPFD模拟

基于CPFD(Computational particle fluid dynamics)方法，对实验室前期研究的催化裂化管式分配器内的颗粒分配特性及内部流动特性进行了数值模拟，系统研究了输送风、松动风及分配器倾斜角度对颗粒分配不均匀指数的影响，并进一步考察了输送风和松动风对分配器各出口气体流量分布及内部气 固流动特性的影响。结果表明，增大输送风量、松动风量以及分配器的倾斜角度均可以降低颗粒分配不均匀指数，但改变松动风量的效果不如改变输送风量和倾斜角度显著。分配器倾斜角存在一个最优值时，颗粒分配均匀性最佳。输送风的增大会使得颗粒出料量最高的排料口的位置逐渐向分配器的末端移动，中间排料口所流出的气体流量占比增大，末端排料口排风量占比减小。引入松动风后，各出口的颗粒排料量更加接近，同时靠近末端排料口的气体流量占比明显增大。     

一种云计算数字签名技术的研究与实现

由于云计算具有可靠性高、成本低、性能高等特点,已经成为了新一代信息技术变革的核心。为了能够有效推动互联网安全架构的可持续性发展。本文提出了一种云计算数字签名技术,该技术有机结合了云计算技术与数字签名技术。首先阐述了数字签名系统中应用云计算技术的价值,其次,分析了云计算数字签名技术的实现模型,并且设计了云计算数字签名协议,最后,开展了实例分析,将云计算数字签名技术应用到移动营业厅的业务信息交易中。结果表明：所有业务均可在网上完成,那么既可大大方便用户,又可降低移动营业厅的工作量,还可确保业务信息交易的可靠性、唯一性、真实性、安全性与不可抵赖性。通过结果分析得出结论：云计算数字签名技术既可保障签名文件的完整性与真实性,又可跨平台操作签名文件,还可让数字签名模型利用互联网来对密码运算基础设施进行便捷化、可靠化地访问。     

Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP

Processing lithium-ion battery (LIB) electrode dispersions with water as the solvent during primary drying offers many advantages over N-methylpyrrolidone (NMP). An in-depth analysis of the comparative drying costs of LIB electrodes is discussed for both NMP- and water-based dispersion processing in terms of battery pack $/kWh. Electrode coating manufacturing and capital equipment cost savings are compared for water vs. conventional NMP organic solvent processing. A major finding of this work is that the total electrode manufacturing costs, whether water- or NMP-based, contribute about 8–9% of the total pack cost. However, it was found that up to a 2?×?reduction in electrode processing (drying and solvent recovery) cost can be expected along with a $3–6?M savings in associated plant capital equipment (for a plant producing 100,000 10-kWh Plug-in Hybrid Electric Vehicle (PHEV) batteries) using water as the electrode solvent. This paper shows a different perspective in that the most important benefits of aqueous electrode processing actually revolve around capital equipment savings and environmental stewardship and not processing cost savings.     

Synthesis of V-doped SiC powder for growth of semi-insulating SiC crystals

V-doped semi-insulating (VDSI) SiC crystal is a promising substrate for high-frequency electronic devices achieved using GaN epitaxial films. However, V doping in a SiC crystal is difficult to control owing to the different sublimation temperatures of VC and SiC. The amount of V changes depending on the growth sequence, which has been a significant concern in VDSI SiC substrates in terms of wafer reliability.In this study, therefore, we aimed to synthesize a single source by vaporizing Si, C, and V under the same conditions to improve the doping issue in VDSI SiC. We synthesized V-doped SiC powder as the starting material for VDSI SiC substrate based on thermodynamic modeling, and the synthesized powder was used to grow a VDSI SiC crystal via physical vapor transport.Finally, considering the homogeneous V concentration in the grown crystal, the synthesized V-doped SiC was observed to be effective to grow VDSI SiC independent of the growth sequence.     

Identifying and Verifying Vulnerabilities through PLC Network Protocol and Memory Structure Analysis

Cyberattacks on the Industrial Control System (ICS) have recently been increasing, made more intelligent by advancing technologies. As such, cybersecurity for such systems is attracting attention. As a core element of control devices, the Programmable Logic Controller (PLC) in an ICS carries out on-site control over the ICS. A cyberattack on the PLC will cause damages on the overall ICS, with Stuxnet and Duqu as the most representative cases. Thus, cybersecurity for PLCs is considered essential, and many researchers carry out a variety of analyses on the vulnerabilities of PLCs as part of preemptive efforts against attacks. In this study, a vulnerability analysis was conducted on the XGB PLC. Security vulnerabilities were identified by analyzing the network protocols and memory structure of PLCs and were utilized to launch replay attack, memory modulation attack, and FTP/Web service account theft for the verification of the results. Based on the results, the attacks were proven to be able to cause the PLC to malfunction and disable it, and the identified vulnerabilities were defined.     

煤矿运输安全智能监控信息系统的设计

以李雅庄煤矿为研究对象,进行了矿井运输安全智能监控信息系统的开发。该系统采用自动化技术、信息技术与煤矿运输系统深度融合,集先进的计算机、网络通信、图像处理、现代检测和自动化技术于一体,可以实现矿井运输的智能监测与自动控制。实践应用表明,该系统有效地保障了运输系统的自动调度和智能控制,保证了安全生产。     

有限元SN中子输运模拟的区域分解并行

确定论中子输运方法具有计算速度快、可获取物理量的精细场分布、可高效多物理耦合等优点，随着有限元方法在中子输运模拟中的应用，复杂几何结构、大尺度下的屏蔽问题和临界问题都能得到高保真建模和分析。离散纵标（S_N）法是求解中子输运方程的有效数值方法，基于OpenMP并行机制对各独立离散方向进行并行求解，可提高S_N输运模拟的计算速度，但并行规模较有限。对几何空间进行区域分解并采用MPI并行机制，可实现大规模并行扩展，进而实现对大型问题的高精度快速求解。本文采用并行自适应非结构网格应用框架JAUMIN进行区域分解和进程间通信，通过并行S_N扫描实现了自主有限元输运程序ENTER的高效并行，完成正确性检验后在天河Ⅱ号超级计算机上使用1 440个CPU核完成了1.43×10⁷网格单元、2.81×10⁹自由度规模问题的测试，计算时间约7.4 h。表明该程序具备了有效模拟大型复杂结构中子输运问题的能力，具有一定工程应用价值。     

极端环境下储库控制系统的通信解决方案

在干旱、高温、潮湿、寒冷等环境中使用宽温的自动化产品一般都能达到要求,但在荒野等极端环境中,没有电力供应,没有网络通信的情况时有发生,进而对自动化系统造成致命性的影响。针对该问题,以土耳其地下天然气储库项目为例,提出了使用太阳能供电,运用卫星进行无线通信的方法实现自动化控制系统的正常运行,成功地解决了该问题。